UP TO 30m2

Premium 200

CLEAN AIR SYSTEM

Compact-Size
No Maintenance Cost
Low Energy Consumption
Air Quality Indicator
High Efficiency

Small in size, big on power!

Powered By Silicon Valley
Breakthrough Technology

  • Small In Size, Big On Power!

    Just slightly bigger than your iPad. It can capture particles and germs as small as 0.02 microns and decompose VOCs like formaldehyde. Moreover, it has a built-in air quality sensor and indicator.

    ★ The smallest Poiema clean air system!

  • Works best in small area

    P200 is able to cover upto 30 square meters. Works best in bedroom, office, baby room or living area.

    The monthly electricity bill is S$2 for 24/7 usage.

    Small In Size, Big On Power!

Keep Your Air Fresh and Clean

FAQ

Do we use HEPA filters?

No, we don’t use HEPA filters. There are NO filters inside P200. P200 uses TPA technology to create clean ahd fresh air. It will remove particles and germs as small as 0.02 microns. (HEPA filter has a limit at 0.3 microns)

Do we use carbon filters?

No, we don’t. Carbon filters are commonly used in filter-type air purifier. Their main function is to absorb VOCs (Volatile organic compounds). P200 uses TPA technology to decompose and remove VOCs directly, therefore you can be assured that the filtered air will be free of VOCs.

Do you need to replace any filter?

No, you don’t have to 🙂 The filter (electrodes) are reusable and easy to wash.

Do you need to turn off the system when you are away from home?

Leave the P200 on all the time! Let your place be filled with of clean and fresh air 🙂 The running cost of keeping the P200 on 24/7 is only $2 per month. This is a small amount in exchange for clean and fresher air!

Why we don’t use Hepa filter like others?

HEPA filter can filter out (trap) particles including bacteria down to size > 0.3um (microns), bacteria and virus are still survive and hold on the filter surface, user need to replace the filter regularly

Two main disadvantages of HEPA filter:

  1. Hepa Filters have to be changed frequently for it to filter air more efficiently, which means more costs are involved. The average cost to replace a new set of Hepa filter ranges from $80 to $150, depending on the air purifier model. The suggested frequency to change Hepa filter is every 6 months.
  2. Hepa Filter has their limitations. It works ineffectively if the amount of air it has to filter is large and the airflow rate is low. Therefore the filtered air might not be clean and fresh all the time.

How do we clean the air without any filters?

P200 uses TPA technology to create clean and fresh air. TPA is filterless technology by silicon valley air experts. For more details please check here.

What is removable particles?

    • Mould spores – 100 – 2 microns
    • Pollen grains – 100 – 0.25 microns
    • House dust mite allergen – 25 – 0.1 microns
    • Bacteria – 25 – 0.25 microns
    • Pet dander – 10 – 0.1 microns
    • Toner dust – 10 – 0.1 microns
    • PM10 – 10 microns or less (PM = Particulate Matter)
    • Tobacco smoke – 4 – 0.01 microns
    • PM2.5 – 2.5 micronsor less
    • Viruses – 0.05 – 0.003 microns
    • Ultrafine particles – 0.1 – 0.001 microns
    • Haze – 10 – 0.01 microns

How P200 remove 0.02 microns particles?

P200 uses emitting electrodes to charge particles, the process is independent of particles size. Other filter-type technology, the filterable particles size is dependent on filters. (HEPA has a limit of 0.3 microns in particle size).

P200 uses collecting electrodes (act as a magnet) to pull all the charged particles as small as 0.02 microns.

How to maintain P200?

Simple remove the filter (electrodes), give it a good scrub with soap and rinse it under running tap water before putting it out to dry. Piece of cake isn’t it?

wash and clean

What is the warranty?

P200 has a one-year onsite warranty and estimated seven years life span. The TPA technology keeps the P200 operating for as longer as possible. Our customer support is here.

How to know if the surrounding air is clean?

P200 provides air quality indicator. You can easily know the status of air quality.

What is Ionic wind?

Ionic wind is generated when a gas discharge is formed between two electrodes in ambient air. Gaseous ions formed in the discharge are accelerated by the electric field and undergo collisions with neutral gas molecules. This exchange of momentum, and the subsequent cascading effect, generates a bulk fluid motion called an ionic wind.

P200 creates 0.3m/s ionic wind, which is the most comfortable wind speed for an indoor environment.

What is the maximum coverage of P200?

The maximum coverage is 30 square meters or 300 square feets.

Is P200 similar to ionizer?

No, P200 is totally different from ionizer.

Ionizer is n very old technology. Ionizer is not effective at removing airborne particles.

How to wall mount P200?

It is easy to save your space when you make your P200 wall mounted.

P200 comes with a wall plate and an installation guide.

Please follow the instructions to fix the wall plate first.

And then you can easily mount P200 on the wall!